Free shipping on all orders 30-day returns 2-year warranty Custom fit for your exact truck
Fit Guide Cart (0)

FIND THE COVER THAT FITS YOUR TRUCK

Every Haulex cover is cut to your exact year, make and model. Not close. Exact.

HOW THE FIT SYSTEM WORKS

  1. ENTER YOUR TRUCK

    Select your year, make and model from the dropdowns. Every combination in our catalog has its own unique cut pattern.

  2. WE CUT TO ORDER

    Your cover is precision-cut to the seat dimensions of your exact configuration. Crew cab, SuperCrew, double cab — each one is different and each one is accounted for.

  3. IT FITS LIKE IT CAME THAT WAY

    Headrests, seatbelts, armrests and console cutouts all line up. No bunching, no gaps, no trimming required.

INSTALL IN UNDER 30 MINUTES

No tools. No seat removal. Follow these four steps.

REMOVE THE HEADRESTS

Pull each headrest straight up and out of its mounting posts. They lift out cleanly on every major truck model. Set them on the rear seat or a clean surface nearby so they do not get scratched.

PRO TIP

If a headrest feels stuck check for a small release button on the post collar. Press it while pulling up.

SLIP THE COVER OVER THE SEAT

Hold the cover open at the top and feed it down over the seat back smooth side out. Work it down toward the seat crease pulling the fabric taut as you go. Make sure the headrest holes align with the posts before moving on.

PRO TIP

Start from the top center and smooth outward to both sides to avoid bunching.

SECURE THE STRAPS

Reach under and behind the seat cushion and locate the elastic anchor straps hanging from the cover. Hook each strap around the seat frame rail and pull snug. Work your way from center outward alternating sides so the cover stays even.

PRO TIP

The cover should feel drum-tight with no loose fabric visible from the front. If it bunches re-tension the straps one at a time.

REATTACH THE HEADRESTS

Line up each headrest post with its collar and push straight down until you feel it click. Give it a firm tug upward to confirm it is locked. Check that the cover fabric around the collar holes lies completely flat.

PRO TIP

If the headrest fabric pulls tight when you push the headrest in the cover may need to be seated slightly lower on the seat back. Pull it down an inch and re-check.

TRUCKS WE COVER

FITMENT QUESTIONS

DOES IT FIT MY EXACT CAB CONFIGURATION?
Yes. We pattern separately for regular cab, extended cab, crew cab, SuperCrew, and double cab. When you select your year and model, you are selecting the exact cab layout your cover is cut for.
WHAT IF MY YEAR ISN'T IN THE DROPDOWN?
We are adding new fitments regularly. If your year isn't listed, contact us and we will let you know when it becomes available.
WILL IT WORK WITH MY FACTORY SEAT FEATURES?
Yes. Our covers are designed to work with factory headrests, seatbelts, armrests, and side airbags. The cover does not interfere with airbag deployment.
WHAT ABOUT THE CENTER CONSOLE AND ARMRESTS?
Front covers include cutouts for the center console and fold-down armrests where applicable. Rear covers account for the fold-down center armrest on crew cab configurations.
HOW DO I INSTALL IT?
No tools and no seat removal required. Slip the cover over the seat, route the straps around the seat back, hook them under the cushion, and you are done. Most installs take under 30 minutes.
CAN I USE IT WITH HEATED OR VENTILATED SEATS?
Yes. The leatherette material does not block heat transfer significantly. Ventilated seats may have reduced airflow but the cover remains fully functional.
WHAT IF IT DOESN'T FIT?
We offer 30-day returns. If the cover doesn't fit your truck as described, contact us and we will sort it out.
DO FLOOR MATS USE THE SAME FIT SYSTEM?
Yes. Every floor mat set is laser-measured and cut to order for your exact year, make and model, the same as our seat covers.

READY TO FIND YOUR FIT?

Enter your truck above or browse by model below.

FIND MY FIT SHOP ALL COVERS